|
| |
|
Applications |
|
- Voice, Video and Data Connectivity over Internet
- LAN/WAN Connectivity (Multiple Sites)
- Satellite News Gathering
- Content Distribution & Contribution
- Ship-to-Shore Communications
- Communications-on-the-Move (Land Vehicles/Trains)
- Network Management & Bandwidth-on-Demand (with Vipersat Management System)

The CDM‑570 and the CDM-570L are entry-level satellite modems that provide industry leading performance and flexibility in a 1 RU package at a very competitive price. It is the platform of choice for Network Operators, Enterprise users, Service Providers, Broadcasters and Government users for a wide range of applications – Cellular Backhaul over IP, Voice-over-IP (VoIP), LAN/WAN connectivity, Satellite News Gathering (SNG), Communication-on-the-Move, Maritime, Off-shore applications etc.
Designed to address the market for low-cost terminals, the modems are available with 70/140 MHz or L-band IF and EIA-530/-422, V.35, EIA-232 and G.703 data interfaces. An optional Internet Protocol (IP) Module with 10/100BaseT Ethernet port is available for IP centric applications.
The advanced FPGA-based architecture along with the internal Flash memory allows for easy field upgrades via the Ethernet port.
|
|
Features |
- Data rate range from 2.4 kbps to 9.98 Mbps
- CDM-570: 50 to 90 or 100 to 180 MHz IF range
CDM-570L: 950 to 1950 MHz IF range
- Fast acquisition demodulator (± 32 kHz acquisition range, 64 kbps, Rate 1/2 QPSK: 150 ms average)
- Modulation types: BPSK, QPSK, OQPSK, 8-PSK, 8-QAM, 16‑QAM
- Forward Error Correction (FEC) choices include Turbo Product Code (TPC), Viterbi, Reed-Solomon, and Trellis Coded Modulation (TCM)
- Automatic Uplink Power Control (AUPC)
- Embedded Distant-end Monitor and Control (EDMAC)
- Asymmetric Loop Timing
- Built-in 1:1 redundancy controller (Y-cables for data, simple and inexpensive external module for IF and RF)
- 1:1 and 1:10 redundancy switches available
- CDM-570: FSK communications to CSAT-5060 or KST-2000A
- CDM-570L: 10 MHz reference for BUC, FSK communications and optional BUC power supply
- CDM-570L: 10 MHz reference and power supply for LNB
- Backwards compatible with the CDM-500/CDM-550, CDM-550T, CDM-600, and CDM-600L
- Interoperable with SDM-300A and SDM-300L3
- 10/100BaseT Ethernet port for M&C with Web browser, SNMP and Telnet support
- IP Module with 10/100BaseT Ethernet port
- Vipersat Management System (VMS) integration
- G.703 Clock Extension for IP backhaul
|
|
IP Module
With its innovative architecture and support for advanced capabilities, an IP Module equipped CDM-570/L allows for efficient IP networking and transport over satellite links. It supports a wide range of applications and network topologies. |
Features |
- easyConnect® for set up with minimal configuration
- Static IP routing for unicast and multicast
- Standards based management via SNMP, Web, or Telnet
- IGMP v1 and v2
- Symmetric as well as asymmetric operation for maximum bandwidth efficiency
- Support for Mesh, STAR and hybrid network topologies
|
| |
Options |
- Header Compression – Reduces the bandwidth required for Voice over Internet Protocol (VoIP) by as much as 60%. Typical Web/HTTP traffic can also be reduced by 10% via header compression.
- Payload Compression – Configurable on a per route basis, Payload compression can reduce the required satellite bandwidth by up to 40%.
- Quality of Service (QoS) – Supports multi-level QoS to reduce jitter and latency for real time traffic, provides priority treatment to mission critical applications and allows non-critical traffic to use the remaining bandwidth.
- Data Encryption – Configurable on a per route basis, the IP Module supports 3xDES data encryption to prevent unauthorized access to data transmitted over the satellite link
-
Vipersat Management System (VMS) – Integrates with the powerful network management tool Vipersat Management System (VMS). In addition to the traditional Monitoring and Control of the CDM-570/L modems, CDD-564/L and CDD-562L demodulators, the VMS allows these devices to share bandwidth, and when needed, switch automatically to a dedicated SCPC channel.
|
|
|