Home » Support » Software Downloads » M&C Utilities

M&C Utilities

To download any of these files, right-click the file name and choose “Save Target As…”.

M&C Utilities

File Name Description Product Application
CRFC-ZIP

CRFC-EXE

CRFC Manual

The CRFC (Comtech RF Control) software utility is Windows-based software that permits M&C (monitor and control) of some CEFD (Comtech EF Data) transceiver and amplifier systems. CSAT-5060, CSAT-6070, XSAT-7080, KST-2000A/B transceivers; HPOD amplifiers; LPOD amplifiers/BUC; SPOD amplifier
SatMac 4.7 ZIP SatMac is the name of the Comtech SATellite system Monitor And Control software. It is used to control Comtech modems, transceivers and 1:1 redundancy controllers and 1:N switches.In order to use the SATMAC Software, the EDMAC (Embedded Distant-end Monitor And Control) configuration within the Comtech device must be set properly. Monitor and Control of local and distant-ends of a satellite communication link is then possible. Up to 20 links may be monitored and controlled. V4.7– CDM-500, 550, 570 and 600 series modemsCRS 200 and 300 1:N redundancy switches

CSAT and XSAT transceivers.

CReflash ZIP The CReflash utility is for RF products. It hasĀ been tested and works on Windows XP, Windows 7 32-bit and Windows 8 32-bit.
CReflash may not work with 64-bit versions of Windows.
RF products

KST/CST M&C Utilities

These KST/CST utilities were developed at Comtech EF Data over the past several years.

Most of these utilities were written for earlier versions of DOS, and may not be compatible with the latest versions of Windows.

If the application doesn’t work from a DOS command window, try selecting DOS at bootup, and then execute the utility.

File Name Description Product Application
RF_MC

RF_MC

A 16 bit Windows based monitor and control program designed for the KST-2000 series of transceivers. This utility supports standalone or redundant system configurations. The rf_mc.pdf file is the user’s guide for the RF_MC program. V2.4 – KST-2000A/B/L
KST_MC A DOS based monitor and control program. V1.7 – RFT-1200 (1MHz & 2.5MHz)
KST_MC2 A DOS based monitor and control program. V1.0 – RFT-2000 (125 kHz)
KST_MC5 A DOS based monitor and control program. V1.0 – RFT-1200 (125 kHz)
KST_MC25 A DOS based monitor and control program. V1.4 – RFT-1225 (1MHz & 2.5MHz)
CST_MC A DOS based monitor and control program. V1.8 – RFT-500 Terminal
CST_MC3 A DOS based monitor and control program. V1.1 – RFT-500 Terminal Multi-carrier
CST_MC5 A DOS based monitor and control program. V1.2 – RFT-505 Terminal
CST_MC7 A DOS based monitor and control program. V1.5 – RFT-700 Terminal
CST_MC25 A DOS based monitor and control program. V1.0 – RFT-500 (125 kHz)
CST_MC75 A DOS based monitor and control program. V1.1 – RFT-705 Terminal